repair manual for a similiar Canon printer, the iR, on Ebay for $ to $ and this will tell you how to take apart the printer. I had the same. imageCLASS D – Canon Inc. Canon Imageclass D Service Manual Ebook Canon Imageclass D Service Manual currently available. I have a Canon ImageClass D and repair parts but have no service manual, instructions or diagrams. Canon USA is of No Help on this- they.
|Genre:||Health and Food|
|Published (Last):||14 December 2017|
|PDF File Size:||5.33 Mb|
|ePub File Size:||19.99 Mb|
|Price:||Free* [*Free Regsitration Required]|
T Contact sensor 7 Try replacing the contact sensor. T Status check 3 Run the troubleshooter of the machine from the PC. T Paper guide plate ascent mechanism, Manual feed pickup roller 6 Does the paper guide plate move up in conjunction with pickup operation?
Set “Long distance 1 ” when registering the one-touch speed dialing and coded speed dialing transmission mode. Only if equipped with ADF functions. If you are handling a PCB or the contact sensor, be sure to touch a metal portion of the machine before starting the work to avoid static damage.
Use selective polling that does not use a password. Shipping charges, if any, must be prepaid.
Canon imageCLASS D Manual
These faults may disappear if the machine is left at rest for some time, or the memory cause of the faults may remain permanently. T [RX] The other party has rejected the machine during polling reception Cause: If you have corrected the skew, check to be sure the settings of all other adjustment items for the ADF are as indicated in specs.
Do not touch the VRs and check pins not found in the lists herein; they are exclusively for the factory, and require special manuql and high accuracy. Noise caused the CPU to malfunction.
Dimension W x D x H You may use them as you would on a fax machine. The machine’s laser scanner unit is sealed by means of a protective housing and external covers, so that the light it produces will not escape outside, ensuring the safety of the user as long as the machine is used under normal conditions.
Canon imageCLASS D860 Basic Manual
F CCD Test 2: T Fixing inlet guide 1 Clean the fixing inlet guide. If you disconnect the jumper plug JP1 of the image processor PCB and turn off manuxl power, all control data will be reset to default settings.
Toner level detection Yes function Cassette paper level detection Yes Chapter 1 1. F 3 Remove the E-ring , gear serviice, belt , and bushing . The user mode menu is constructed as follows: Go to step 5. Paper Feeding Problems Message There is a paper jam. Replace the image processor PCB.
T Transfer guide 11 Measure the transfer guide and other metal portions. Average 39 digits Onetouch dial: If such a condition has occurred, refer to the instructions of replacing the image processor PCB.
Print out all image serrvice and system data, and execute all-clear; then, store the system data once again. If you want to make copies on any other size paper, use the multi-purpose tray.
In a memory full condition, a call arrived when a original was set imageclasw. Increase the settings of No. The paper you are using may be causing the jams.
Execute auto adjustment of the contact sensor LED intensity as follows: Yes Does a jam occur? T Contact sensor drive rail, reader motor 5 Move the contact sensor slowly.